Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.utec.edu.pe/handle/UTEC/43
Título : Embedded position control system of a manipulator using a robust nonlinear predictive control
Autor: Rojas-Moreno, Arturo
Valdivia-Mallqui, Richard
Fecha de publicación : nov-2013
Resumen : This paper deals with the implementation of a embedded position control system using a robust nonlinear predictive controller, which is employed to control simultaneously angular positions of the base and arm of an angular manipulator of 2DOF (2 Degrees of Freedom). The design of such control system requires the derivation of the dynamic nonlinear model of the manipulator, as well as the determination of the corresponding predictive control law. Intensive simulation studies permitted to find out the initial values of the tuning parameters of the predictive controller. A CRIO (Compact Reconfigurable Input/Output) device was used to embed the control system. Good performance of the predictive control system was verified via experimentation.
Palabras clave : Mathematical model
Manipulator dynamics
Uncertainty
Vectors
Robustness
Predictive control
Editorial : IEE
URI: http://repositorio.utec.edu.pe/handle/UTEC/43
Aparece en las colecciones: Ingeniería Electrónica

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Rojas, Moreno, Arturo2.pdf411.1 kBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.