Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/20.500.12815/27
Título : Design of an 10 kVA-45 A automatic static transfer switch module
Autor: Noel, Julien George Andre
Fecha de publicación : 8-abr-2014
Resumen : Uninterruptible Power Supplies (UPS’s) are designed to provide emergency power when the main power source fails. To avoid this impact and to protect effectively the loads, one solution is to provide a redundant loading system using a dual power energy source other than the UPS to achieve an automatic static transfer when necessary. In this work, an additional module has been designed and connected between a critical load and the output of two independent UPS systems; if primary UPS fails, the module automatically transfers the load to the other one with a minimum transfer switching time. The results presented demonstrate a transfer switch time below 3 ms, compared to commercial products of 4 to 6 ms.
Palabras clave : Uninterruptible Power Supplies
Ingeniería Electrónica
Transfer Switch module
Editorial : Institute of Electrical and Electronics Engineers
URI: https://hdl.handle.net/20.500.12815/27
DOI : https://doi.org/10.1049/cp.2014.0468
Aparece en las colecciones: Ingeniería de la Energía

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Noel, Julien George Andre.pdf322.62 kBAdobe PDFVisualizar/Abrir


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons